DG-3R/N

DG-3R/N

Device group: Threshold gas detectors
Device type: DG/F

Detectors DG/F are used for continuous monitoring of premises for combustible and toxic gases (and oxygen). The detectors come with two preset concentration thresholds for alarm purposes.

DG/F detectors are designed to work only with:

DG/F detectors cannot be used in hazardous locations (according to ATEX Directive).

Features

  • two thresholds set at manufacturing stage;
  • semiconductor sensor for combustible gases or electrochemical sensor for toxic gases or oxygen;
  • easily exchangeable sensor unit for straightforward maintenance;
  • easy change of detected gas and easy calibration (all available DG/F sensor units ready to operate in each DG/F detector);
  • intelligent sensors with build-in TWA and STEL measurement, alarm history, recommended calibration time mark signal;
  • built-in temperature compensation;
  • low cost operation;
  • long time operation (typically 10 years for semiconductor sensors);
  • all detectors are calibrated in our own GAZEX Calibration Laboratory operating in accordance with PN-EN ISO/IEC 17025 (PCA accreditation No AP150).

Typical system configuration



Device model: DG-3R/N

Technical parameters

Gas sensor module Sensor Substance/property Standard alarm thresholds or measuring range
MS-3R/N Infra-red Organic compounds
20/40
%LEL

Two-state outputs (threshold)
2
Visual signalling, built-in
Supply voltage
System powered
Dimensions
110 x 140 x 55 mm
EAN Code
5901769655256
Net price
PLN2,099.00 N

Documentation

Series Technical data Device information sheet User Manual Declaration of conformity
W1
U4 Download file Download file

Suggested products

AP-1
Splash-proof enclosures AP-1
Splash-proof enclosures to protect detectors from adverse weather conditions and mechanical damage
AR-1
Tubular shields AR-1
Profiled tube guards to protect the detector from direct mechanical damage
DG/w
DG/w
Adaptation of DG/F, DG/M, DG/P or DG/PV detectors for installation into a ventilation duct
GTS
Gas test sets GTS
Test sets for verifying the correct operation of detectors by injecting a gaseous test mixture into the measuring chamber of the detector