DETnet View

Software enables - using a PC with Windows operating system - configuration and visualization of digital control modules and detectors with RS-485 port.

Changelog

1.8.1 25-08-2023

Fixed

  • Fixed configuration error for MDD-1 and MDD-1x/T devices - the error occurred in version 1.8.0.

1.8.0 18-08-2023

Added

  • Support for DD-PnR version W2.

1.7.0 14-12-2022

Added

  • The „Parity Control” parameter has been added to the „Connection” window. This allows connecting devices with non-standard settings (in GAZEX CSDG, parity check is enabled by default).

1.6.2 07-05-2021

Changed

  • Minor bugs have been fixed.

1.6.1 18-12-2020

Fixed

  • Corrected bug in connection parameters selection.

1.6.0 23-10-2020

Added

  • The function of searching the address of the connected device (scan);
  • Support for MDD-1 version W4 and MDD-1x/T version W2;

Changed

  • Configuration data (connection parameters) stored in the Application Data folder (not in the installation folder) - no administrator rights to save these files are required. The program installed in the default location (in the ProgramFiles folder) works with full functionality also without administrator privileges;

1.5.0 20-09-2018

Added

  • Option of automatic connection with the device after starting the program (with previously selected parameters). If the option is not active, the „Connection options” window is displayed after each start.
Version Date of issue License
1.8.1 08/25/2023 Freeware Download file
1.8.0 08/18/2023 Freeware Download file
1.7.0 12/14/2022 Freeware Download file
1.6.2 05/07/2021 Freeware Download file
1.6.1 12/18/2020 Freeware Download file
1.6.0 10/23/2020 Freeware Download file
1.5.0 09/20/2018 Freeware Download file

MD16 View

Software enables - using a PC with Windows operating system - visualization of operation of digital control module MD-8, MD-16, MDP-8, MDP-16 type (version with v5.2 software or later).

Changelog

2.14.0 of 08-10-2021

Added

  • support for new gas indices and measurement ranges introduced in W17 MDP-16;

2.13.0 of 26-02-2020

Changed

  • Registration of measurement data - every day a new file is created, the file name consists of the detector number and date;

2.12.0 of 05-11-2019

Added

  • Possibility of automatic activation of the registration when the program is activated;
  • Possibility of starting the application with the indication of the location of saving configuration files as a parameter.

Changed

  • Configuration data (connection parameters, storage interval, storage location, detector descriptions, etc.) stored in the Application Data folder (and not in the installation folder) - no administrator rights to save these files are required. The program can be installed in the default location (in the ProgramFiles folder);

2.11.0 of 20-09-2018

Added

  • Option of automatic connection with the device after starting the program (with previously selected parameters). If the option is not active, the „Connection options” window is displayed after each start.

2.10.0 of 12-06-2018

Added

  • Support for hydrogen sulfide detectors with a measuring range of 20ppm.

2.9.0 of 12-04-2018

Added

  • Support for detectors: ozone, carbon dioxide, argon/helium, explosive gases with a measuring range of 50% LEL;
  • Notification of a new alarm or detector failure by blinking the program icon in the taskbar (if the window is minimized or inactive);
  • Selectable options for restoring and activating the window (when the window is minimized) in the event of a new alarm or sensor failure.
Version Date of issue License
2.14.0 10/08/2021 Freeware Download file
2.13.0 02/26/2020 Freeware Download file
2.12.0 11/05/2019 Freeware Download file
2.11.0 09/20/2018 Freeware Download file
2.10.0 06/12/2018 Freeware Download file
2.9.0 04/12/2018 Freeware Download file

MDD256 View

Software enables - using a PC with Windows operating system - configuration and visualization of the digital control module MDD-256/T (version with v1.4 or later software).

Changelog

MDD-256 View changelog

1.6.0 27-12-2021

Added

  • Support for the function of assigning additional devices to all detector groups - available for MDD-256/T from W34 version onwards;
  • Warning that in older versions of the MDD-256/T module (in versions older than W34) the remote change of settings of additional devices d.o.2.3 - d.o.2.7 does not work.

1.5.1 07-05-2021

Changed

  • Minor bugs have been fixed.

1.5.0 of 14-01-2020

Added

  • The visualization window adds signaling of the following states reported by the devices: h1 - alarm A1 completed, h2 - alarm A2 completed, h3 - alarm A3 completed.

1.4.0 of 09-08-2019

Added

  • Recording of measurement values with adjustable recording interval (only for measurement detectors);
  • Notification of sensor status change and communication failure with MDD-256/T by flashing the program icon in the taskbar (if the window is minimized or deactivated).

Changed

  • Configuration data (connection parameters, storage interval, storage location, detector descriptions, etc.) stored in the Application Data folder (and not in the installation folder) - no administrator rights to save these files are required. The program can be installed in the default location (in the ProgramFiles folder);

1.3.0 dated 20-09-2018

Added

  • Option of automatic connection with the device after starting the program (with previously selected parameters). If the option is not active, the „Connection options” window is displayed after each start.

1.2.3 dated 20-07-2018

Added

  • Choice of English language version.
Version Date of issue License
1.6.0 12/27/2021 Freeware Download file
1.5.1 05/07/2021 Freeware Download file
1.5.0 01/14/2020 Freeware Download file
1.4.0 08/09/2019 Freeware Download file
1.3.0 09/20/2018 Freeware Download file
1.2.3 07/20/2018 Freeware Download file

SG-1

Software allows - using a PC with a Windows operating system - to configure the operation of the GS-2 voice alarm device.

Version Date of issue License
1.0.0 03/02/2015 Freeware Download file