AirTECH eko+

AirTECH eko+ is an ventilation controller designed to monitor indoor carbon dioxide concentration at the range of 0÷2000 ppm (optionally up to 3000 ppm).

AirTECH eko+ is designed to be used in offices, schools, bars, restaurants, cinemas, and apartments. Measurement of CO2 is realized by state-of-the-art non-dispersive infrared (NDIR) sensor.

AirTECH eko+ is supplied with relay outputs to control the ventilation system according to ventilation requirements. AirTECH eko+ maintains the high indoor air quality and saves energy costs of ventilation system and/or air conditioning (heating/cooling).

Adequate ventilation reduces temporary sickness, downtime and loss of productivity.

Features

AirTECH eko+ consists of two units: CO2 sensor (to be mounted in the monitored room) and steering/supplying module.

CO2 sensor:

  • state-of-the-art non-dispersive infrared (NDIR) technology to measure carbon dioxide gas concentration
  • two alarm levels (set at factory)
  • internal automatic self diagnostic and calibration
  • long sensor operating lifetime (> 10 years)
  • wall-mounted housing
  • optionally: LCD display

Steering/supplying module

  • IP44 housing
  • connection to Sensor by either four wiring phone cable or UTP cable (max 50 m)
  • two relay outputs (max 250VAC)
  • low power supply (230VAC, no power-ON switch)

Connection diagram

Offered models

Name Sensor Substance/property Standard alarm thresholds or measuring range Supply voltage Net price C/G
Infra-red Carbon dioxide (CO2)
0 ÷ 2000
ppm
230VAC 487.00 zł S
Infra-red Carbon dioxide (CO2)
0 ÷ 3000
ppm
230VAC 899.00 zł N
Infra-red Carbon dioxide (CO2)
Temperature (T)
Humidity (RH)
0 ÷ 3000
0 ÷ 50
0 ÷ 95
ppm
°C
%
230VAC 1,499.00 zł N
 
Infra-red Carbon dioxide (CO2)
0 ÷ 2000
ppm
399.00 zł N
Infra-red Carbon dioxide (CO2)
0 ÷ 3000
ppm
859.00 zł N
Infra-red Carbon dioxide (CO2)
Temperature (T)
Humidity (RH)
0 ÷ 3000
0 ÷ 50
0 ÷ 95
ppm
°C
%
1,419.00 zł N

Detection of substance/property in other areas or other substances/properties is possible = special execution, requires consultation.
In special cases, it is possible to select the detector parameters for a specific application = required analysis of the conditions of use.