DG-P1R5/N

DG-P1R5/N

Device group: Concentration-measuring gas detectors
Device type: DG/P

Detectors DG/P are used for continuous monitoring of premises for combustible and toxic gases. The detector performs cyclic measurement of gas concentration in the air and transmits the measured value in 4-20mA standard (passive output).

DG/P detectors are designed to work with:

For use with control units from other manufacturers, GAZEX recommends to use detectors type DG/PV with dual outputs (active 4-20mA and 2-10V).

Features

  • 4-20mA standard analog output (passive);
  • easily exchangeable sensor unit and easy maintenance;
  • easy change of the detected gas or calibration of the detector;
  • built-in temperature compensation;
  • infra-red sensor for combustible gases or electrochemical sensor for toxic gases or oxygen;
  • sensor unit with “zero” and “span” regulation (calibration outside the detector);
  • low-cost operation;
  • all detectors are calibrated in our own GAZEX Calibration Laboratory operating in accordance with PN-EN ISO/IEC 17025 (PCA accreditation No AP150).

Typical system configuration



Device model: DG-P1R5/N

Technical parameters

Gas sensor module Sensor Substance/property Standard alarm thresholds or measuring range
MS-P1R5/N Infra-red Liquefied petroleum gas (LPG)
0 ÷ 100
%LEL

Output in 4-20mA standard
Visual signalling, built-in
Supply voltage
System powered
Dimensions
110 x 140 x 55 mm
EAN Code
5901769656802
Net price
PLN1,949.00 S

Documentation

Series Technical data Device information sheet Instruction manual Declaration of conformity
W1 Download file
U4

Suggested products

AP-1
Splash-proof enclosures AP-1
Splash-proof enclosures to protect detectors from adverse weather conditions and mechanical damage
AR-1
Tubular shields AR-1
Profiled tube guards to protect the detector from direct mechanical damage
DG/w
DG/w
Adaptation of DG/F, DG/M, DG/P or DG/PV detectors for installation into a ventilation duct
GTS
Gas test sets GTS
Test sets for verifying the correct operation of detectors by injecting a gaseous test mixture into the measuring chamber of the detector