DEX-P4E/N2

DEX-P4E/N2 Ex

Product model withdrawn from sale

Device group: Concentration-measuring gas detectors
Device type: DEX/P

DEX/P detectors are designed to measure gas or vapour concentration of explosive or toxic liquids or oxygen. They are equipped with analog current output in 4-20mA standard.

DEX/P detectors are designed to work with:

The detectors meet the essential requirements of Directive 2014/34/EU (ATEX) of the European Parliament and of the Council of 26 February 2014, on the harmonization of the laws of the Member States relating to protective systems intended for use in potentially explosive atmospheres, implemented by the Regulation of the Minister of Development on requirements for equipment and protective systems intended for use in potentially explosive atmospheres of 6 June 2016. (Journal of Laws 2016 item 817).

The detectors are devices with explosion-proof construction of flameproof cover type and can be used in zones 1 or 2 threatened with explosion of flammable gases or vapors classified as explosiveness group IIA, IIB or IIC, temperature classes T1, T2, T3, T4, T5 or T6.

Features

  • 4-20mA standard analog output (passive);
  • easily interchangeable sensor unit and easy maintenance;
  • easy change of detected gas or calibration of the detector;
  • built-in temperature compensation;
  • catalytic or infra-red sensor for combustible gases or electrochemical sensor for toxic gases or oxygen;
  • sensor unit with “zero” and “span” regulation (calibration outside the detector);
  • low-cost operation;
  • easy fit to existing systems with 4-20mA standard inputs (using MDPL1 limiter);
  • high temperature (up to +80°C) version available;
  • all detectors are calibrated in our own GAZEX Calibration Laboratory operating in accordance with PN-EN ISO/IEC 17025 (PCA accreditation No AP150).

Typical system configuration



Device model: DEX-P4E/N2

Technical parameters

Output in 4-20mA standard
Ability to work in the EX zone
ATEX certificate
Supply voltage
System powered
Dimensions
105 x 103 x 54 mm

Documentation

Series Technical data Device information sheet Instruction manual Declaration of conformity
U2 Download file Download file Download file

Suggested products

AP-1
Splash-proof enclosures AP-1
Splash-proof enclosures to protect detectors from adverse weather conditions and mechanical damage
AR-1
Tubular shields AR-1
Profiled tube guards to protect the detector from direct mechanical damage
DEX-G
DEX-G Ex
ATEX compliant DEX/F, DEX/A or DEX/P detector adaptation for operation in dust explosive areas
GTS
Gas test sets GTS
Test sets for verifying the correct operation of detectors by injecting a gaseous test mixture into the measuring chamber of the detector